This topic has been closed by the administrator. Comments are no longer accepted.
At some point in the future we will need to do something with our upper back roof. It is just under 2/12; roughly 14x32 area. There is a ridge vent currently in place. My question is what would be the most cost effective way to get a metal roof up there and the effect of same on the current ridge vent?
Or copy this URL:
https://www.metalroofing.com/spirit/comment/3208/find/
You will need to find a metal roof which is approved for a 2:12 pitch installation. Generally, this will be a vertical seam product that is mechanically seamed after installation. There may also be some "snap-lock" panels with sealant in the seams which can be used at this pitch.
I would suggest using a new ridge vent which should be available with the roofing.
5/31/2004
Or copy this URL: https://www.metalroofing.com/spirit/comment/3208/find/5/31/2004
Or copy this URL: https://www.metalroofing.com/spirit/comment/3209/find/