Vented Cap: "Looking for a pre-cut foam to match my aluminum roof ..." - Guest User (4/9/2004) | Ventilation | Archive | Ask The Experts Forum

This topic has been closed by the administrator. Comments are no longer accepted.

Looking for a pre-cut foam to match my aluminum roof on my building. It was built 20 years ago and everyone tells it is not made any more, can you help me out. The original vented cap only covered and inch of the roof panel ( the foam is rotted ) and I plan to install a wider cap with new foam to eliminate leaks. Where can I locate foam to match my roof panel or can I use some other type of foam to follow contour. I can take picture of my roof panels. It is styled with 3 ridges then a flat, then three ridges ect.... Thanks Bill	Guest User 4/9/2004	Share Or copy this URL: https://www.metalroofing.com/spirit/comment/2985/find/
Please email me pictures if you can. Todd Miller [email protected]	Guest User 4/10/2004	Share Or copy this URL: https://www.metalroofing.com/spirit/comment/2986/find/
Please email me pictures if you can. Todd Miller [email protected]	Guest User 4/10/2004	Share Or copy this URL: https://www.metalroofing.com/spirit/comment/2987/find/