This topic has been closed by the administrator. Comments are no longer accepted.
Hi
I have a relativley flat roof (residencial) with a slop of 3/16 of an inch per foot, can a metal roof be installed on the roof without adding a new pitch to the roof. I had read somewhere there was a standing seam commercial product that had a 2" standing seam for this situation but haven't been able to find the info.
Any help would be greatly appreciated.
Larry
Or copy this URL:
https://www.metalroofing.com/spirit/comment/2936/find/
Generally spaeking the new building codes call for a minimum of 1/4" in 12". There are a number of commercial SS products that should be fine here as you probably do have long sheet lengths. Most of our members are steep slope manufacturers. As I do not know the area you are in I do not know exactly where to send you. I would try Centria.
3/29/2004
Or copy this URL: https://www.metalroofing.com/spirit/comment/2936/find/Dura-Loc Roofing Systems, Inc.
3/30/2004
Or copy this URL: https://www.metalroofing.com/spirit/comment/2937/find/