This topic has been closed by the administrator. Comments are no longer accepted.
Is there any cut out and attach products to patch old nail holes in an older building.
I understand I could use screws with caulk but one time seen some plugs that could be used.
Or copy this URL:
https://www.metalroofing.com/spirit/comment/2160/find/
If you just need to fix a hole where an old lead head nail no longer holds then you can buy screws with washers of larger diameter shanks say #12 or #14 that will bite into the wood and hold tight.
If you have holes in no mans area of the metal sheet there are some companies that manufacturer a repair tape and brush over protection system for that. Contact a local commercial pre engineered contractor to help source this.
If it is Galvanized sheet and you want a neat permenant fix, then then sand around the hole, place a piece of Galvaized metal behind it and solder the hole shut.
Or copy this URL:
https://www.metalroofing.com/spirit/comment/2161/find/
I would really like to find the "repair tape" that is made for repairing galvanized roofing holes. I live in a rural area and have asked about such a product but only get a blank stare.
any suggestions?
Or copy this URL:
https://www.metalroofing.com/spirit/comment/2162/find/
Look up one of the metal magazines such as metalmag.com, moderntrade.com or metalroofing.com and get a list of their advertisers. If you can't pick one out, leave an inquiry and I'm sure they will plug you in.
If that does not work go to a roofing distributor and ask for some self adhesive EPDM tape.
8/19/2003
Or copy this URL: https://www.metalroofing.com/spirit/comment/2160/find/Dura-Loc Roofing Systems, Inc.
8/21/2003
Or copy this URL: https://www.metalroofing.com/spirit/comment/2161/find/8/25/2003
Or copy this URL: https://www.metalroofing.com/spirit/comment/2162/find/Dura-Loc Roofing Systems, Inc.
8/25/2003
Or copy this URL: https://www.metalroofing.com/spirit/comment/2163/find/