Old vertical steel siding pattern | General Discussion | Archive | Ask The Experts Forum

This topic has been closed by the administrator. Comments are no longer accepted.

Does anyone know who might have manufactured the siding/roofing pattern in the attached drawing. It was used on a pole building put up about 30 years ago as both siding and roof. I'm adding an extension and would like to match it if I can. It's a dark brown with a subtle wood grain pattern. The dimensions in the attached drawing are approximate. Thanks.	Robert Griffith 7/20/2010	Share Or copy this URL: https://www.metalroofing.com/spirit/comment/14992/find/
I am sorry ... I do not have any ideas on this.	Todd Miller Isaiah Industries, Inc. 8/1/2010	Share Or copy this URL: https://www.metalroofing.com/spirit/comment/14993/find/
Thanks Todd. I can't find anything close to this from any current vendors. Guess I'll just have to settle for a single rib configuration.	Guest User 8/5/2010	Share Or copy this URL: https://www.metalroofing.com/spirit/comment/14994/find/
If you just need a small amount you could potentially go to a sheet metal shop and have them reproduce this look.	Todd Miller Isaiah Industries, Inc. 8/5/2010	Share Or copy this URL: https://www.metalroofing.com/spirit/comment/14995/find/