This topic has been closed by the administrator. Comments are no longer accepted.
My contractor is installing typical painted metal sheets over an existing 5v metal roof by furring out with pressure treated 1x4's. One maker of a metal roofover system advised that the chemicals in the
treated wood would "eat" the metal. What do you think? Is this method better than tearing off the old roof? (I asked the contractor to do it this way do to
the "thermal break" created between the two roofs,
I'm in Florida and need any extra possible insulation).
Thanks,
Fred
Or copy this URL:
https://www.metalroofing.com/spirit/comment/1942/find/
The chemicals in the lumber could very well be corrossive when in contact with the metal. The coating on the back side of the metal will provude some protection but not forever. Inqiuire with the roofing manufacturer who knows more about the quality of their back coat and their metal substrate.
Overall, though, I would suggest non-treated lumber or an underlayment between the lathe and the metal.
Or copy this URL:
https://www.metalroofing.com/spirit/comment/1943/find/
There is a reaction when there is moisture present and it is worse with galvalume. I must qualify it as the copper based pressure treatment. On the extreme other side of the coin, standard spruce or pine lumber will release acids when the become wet which will eat the metal away from the back.
Unless you are in a termite prone area, use standard kiln dried lumbe. Better yet ventilate the air chamber along with the attic and you will be fine.
Or copy this URL:
https://www.metalroofing.com/spirit/comment/1944/find/
I have an old barn with a layer of old wood shingles then a layer of asphalt shingles on top of the wood shingles. Many of the asphalt shingles are missing. Can I apply furring strips over old roof and apply a new metal roof?
Or copy this URL:
https://www.metalroofing.com/spirit/comment/1945/find/
It depends upon what type of metal roof you choose. Some vertical seam systems, as well as some of the shake and tile profiles, can be installed in this manner.
6/26/2003
Isaiah Industries, Inc.
6/27/2003
Dura-Loc Roofing Systems, Inc.
6/27/2003
7/3/2004
Isaiah Industries, Inc.
7/5/2004