Trim issue?: "We're gonna DIY our new metal roof over our existing ..." - Guest User (8/29/2009) | Installation Process | Archive

This topic has been closed by the administrator. Comments are no longer accepted.

We're gonna DIY our new metal roof over our existing shingles. There is a little overhang where the shingles meet the trim board and there is also a 1x3 board underneath this over hang. Do we need to remove the 1x3 and trim the over hang before installing the metal trim?	Guest User 8/29/2009	Share Or copy this URL: https://www.metalroofing.com/spirit/comment/13799/find/
The answer to this is dependent upon the design of the metal roof and the trim. However, in most cases the answer will be yes.	Todd Miller Isaiah Industries, Inc. 9/3/2009	Share Or copy this URL: https://www.metalroofing.com/spirit/comment/13800/find/
we're using ribbed metal with angle and rake trim	Guest User 9/7/2009	Share Or copy this URL: https://www.metalroofing.com/spirit/comment/13801/find/
Always adher to manufacturer instructions but I believe most instructions will be 1.5 - 3 inches.	Todd Miller Isaiah Industries, Inc. 9/9/2009	Share Or copy this URL: https://www.metalroofing.com/spirit/comment/13802/find/