Standing seam roof | General Discussion | Archive | Ask The Experts Forum

This topic has been closed by the administrator. Comments are no longer accepted.

Todd, What should the minimum overhang be on a standing seam roof with a 12/12 pitch?	Guest User 2/1/2009	Share Or copy this URL: https://www.metalroofing.com/spirit/comment/12676/find/
Are you talking about overhag of the roof structure (soffit) or the panels themselves?	Todd Miller Isaiah Industries, Inc. 2/1/2009	Share Or copy this URL: https://www.metalroofing.com/spirit/comment/12677/find/
Panels themselves! I see alot of them flush with the drip edge!	Guest User 2/1/2009	Share Or copy this URL: https://www.metalroofing.com/spirit/comment/12678/find/
Usually you use an extended eve drip edge and you take the sheet and hem it 1" and that locks in to the drip edge covering the fastners. so make sure you and the inch for the hem and the drip overhangs an inch. so add 2 inches past your fascia.	Guest User 2/1/2009	Share Or copy this URL: https://www.metalroofing.com/spirit/comment/12679/find/
dlc's advice is correct. Always adhere to manufacturer instructions.	Todd Miller Isaiah Industries, Inc. 2/1/2009	Share Or copy this URL: https://www.metalroofing.com/spirit/comment/12680/find/