This topic has been closed by the administrator. Comments are no longer accepted.
I am having a hard time figuring out the best way to install transition metal on my roof. The main deck is a 12/12 with a 4/12 dormar. I think bring the metal on the 12/12 up under the overhand of the 4/12, install trans. metal then bring the top piece down on the transition then go across. But the transition metall would be sandwiched between the 2 corrugated panels. They wont mesh well and Im afraid of it not looking right. Any suggestions?
Bill
Or copy this URL:
https://www.metalroofing.com/spirit/comment/12401/find/
This sounds correct. Just make sure that you keep things so that a positive pitch is maintained on the transition flashing.
Feel free to send me picture sor more questions. Also, have you contacted the roofing manufacturer?
[email protected]
12/4/2008
Or copy this URL: https://www.metalroofing.com/spirit/comment/12401/find/Isaiah Industries, Inc.
12/5/2008
Or copy this URL: https://www.metalroofing.com/spirit/comment/12402/find/