This topic has been closed by the administrator. Comments are no longer accepted.
I have some wind damage to my barn roof and I am having a hard time finding the exact metal panel style. The panels are a "3V" type panel 2ft wide by 12ft long, the "V's" are 1in high and 12in on center. The panels are very similar to the 5V Crimp panel, only without the additional "V's" on the outside edges. Any advice/assistance would be appreciated. Please contact me on my cell phone 513-405-4033 if you know where this type of panel can be purchased. Thanks - Andy
Or copy this URL:
https://www.metalroofing.com/spirit/comment/12065/find/
Andy, I too need some 3v panels and am actively seeking a few to replace holes in the roof from chimney removal and rusted through sections. My location is east TN. Were you able to locate any panels?
800-688-3896 ext 1 I will let you know if I find extra panels.
Or copy this URL:
https://www.metalroofing.com/spirit/comment/12066/find/
The panels you guys are describing is what we call an "AP" panel. The sheets are 2' wide with a 1" high rip every one foot. In Texas a company called Mueller Inc. (not a MRA member) makes them. We used to use this panel a lot and from a distance (when you can't see the screws) looks like a standing seam.
I do not know of any other companies that make it but I'm sure that someone does. Go to Mueller's website and see if the profile matches what you are looking for.
[email protected]
9/17/2008
Isaiah Industries, Inc.
9/30/2008
12/15/2008
12/17/2008
12/17/2008