This topic has been closed by the administrator. Comments are no longer accepted.
We have several projects going on, one being a small 16x20 shed type structure, completely hand made, non-pro, that is attached to an existing larger structure.
My main concern is the metal roofing. We have prepared everything and are ready to lay the first sheet. HOWEVER, I am concerned about condensation. We have the purlins in place, therefore is there a product, to your knowledge, that we could place over the purlins, before the metal is in place? Or, would we need to place it under the purlins/between the trusses?
Normally, I would not be concerned as this is not a heated structure and will only be used ocassionally for horses/ponies. However, we would like to utilize the above area for hay storage. In order to have this hay area, it's imperative that we have NO moisture/condensation. Venting is also an issue but it will be an open type structure so I assume it may not be a HUGE issue.
I can send photos if needed.
Thanks in advance!
[email protected]
4/11/2008
Or copy this URL: https://www.metalroofing.com/spirit/comment/11234/find/