Skylights and Standing Seam Metal ...: "I recently received proposals from 4 different roofing contractors for ..." - Rod J (4/7/2008) | Skylights and Bay windows | Archive

This topic has been closed by the administrator. Comments are no longer accepted.

I recently received proposals from 4 different roofing contractors for a residential standing seam metal roof. One (and only one) of the contractors mentioned that my existing skylights would be a problem. He mentioned they were too low-profile, and would have to remove them and replace them with new curb-mounted skylights. My existing skylights are by Velux, and are considered to be relatively high-end. The contractor has suggested I replace them with cheaper skylights that are curb-mounted. I have questioned each of the other contractors, and none of them consider the existing skylights to be a problem. In fact, each of them detailed how they address it via flashing, etc,. Anyone think the lone contractor is just bold enough to shout "the emperor is wearing no clothes!" or do you think he may be off-base? I appreciate your feedback. Thanks. RJ	Rod J 4/7/2008	Share Or copy this URL: https://www.metalroofing.com/spirit/comment/11205/find/
RJ, As just another roofing contractor in Texas, I can tell you the Velux skylights can be flashed. [email protected]	Guest User 4/7/2008	Share Or copy this URL: https://www.metalroofing.com/spirit/comment/11206/find/
Yes. This is done pretty regularly unless there are some real oddball circumstances to what you have.	Todd Miller Isaiah Industries, Inc. 4/8/2008	Share Or copy this URL: https://www.metalroofing.com/spirit/comment/11207/find/
I thought so as well. Thanks to both of you! RJ	Rod J 4/10/2008	Share Or copy this URL: https://www.metalroofing.com/spirit/comment/11208/find/
A skylight lift sounds like the solution to your dilemma. Uninstall the skylight and install 2x or 1x framing or any combination of the two to get the desired height you feel will get the job done. You will need to flatten the Velux brackets to be able reuse them properly. The result will be a higher profile skylight. You may need to add additional flash metals as the Velux flashing kit you have may not work any more.	Guest User 4/13/2008	Share Or copy this URL: https://www.metalroofing.com/spirit/comment/11209/find/
Thanks.	Todd Miller Isaiah Industries, Inc. 4/27/2008	Share Or copy this URL: https://www.metalroofing.com/spirit/comment/11210/find/
Was your roof with skylights successfully installed? I need a new roof on a property with a low pitch and 2 existing skylights. One roofer suggested a single ply rubber asphalt roof. I think I'd like metal. Thanks.	Guest User 7/31/2008	Share Or copy this URL: https://www.metalroofing.com/spirit/comment/11211/find/
With a low pitch the skylights should be mounted on curbs and flashed accordingly, which will probably entail some custom work. I believe Velux recommends 3:12 minimum slope.	Guest User 7/31/2008	Share Or copy this URL: https://www.metalroofing.com/spirit/comment/11212/find/
good advice.	Todd Miller Isaiah Industries, Inc. 8/1/2008	Share Or copy this URL: https://www.metalroofing.com/spirit/comment/11213/find/

Skylights and Standing Seam Metal Roofs