Cutting standing seamless panels: "We own a Metal Man rollformer we purchased from Englert ..." - Dave Cohn (2/11/2008) | General Discussion | Archive

This topic has been closed by the administrator. Comments are no longer accepted.

We own a Metal Man rollformer we purchased from Englert supply. We have done only Alum. roofs which were easy to cut but are doing a Galvalume SSR now and the owner wants to know what is the best way to cut across the panel and up and over the profiles. I saw on the web to either use power shears or a nibbler. Which would work the best and what kind should he purchase and where. I want to make sure to tell him the correct method because it is our name on the job. The profile is a series 2000 with 24g steel. Thank you in advance for your help.	Dave Cohn 2/11/2008	Share Or copy this URL: https://www.metalroofing.com/spirit/comment/10944/find/
Dave, we ended up emailing about this after you had posted. Please let me know if you did not get your answer.	Todd Miller Isaiah Industries, Inc. 2/23/2008	Share Or copy this URL: https://www.metalroofing.com/spirit/comment/10945/find/
Tim, Thank you very much for your help. Met with our rep and he took care of my questions. Thanks again for a great forum. Dave	Guest User 2/28/2008	Share Or copy this URL: https://www.metalroofing.com/spirit/comment/10946/find/
Great. Thanks.	Todd Miller Isaiah Industries, Inc. 3/1/2008	Share Or copy this URL: https://www.metalroofing.com/spirit/comment/10947/find/