This topic has been closed by the administrator. Comments are no longer accepted.
i work for a metal roofing company, we manufacture and install a screw-down (3'), a snaplock (knudson), and a berridge standing seam (z-lock). i was hoping to get some advice or tips as far as installing the standing seam over 1'' rigid insulation. what type of ins. board should i use that is affordable and beneficial to the home owner.our smap-lock has a nail-strip and our berridge panels have a continuous clip, how would i fasten my panels securely if im going through the ins. do i have to use a certain type of clip to keep my pans tight to the ins. layer? i want to install a better roof system and know this system is very attractive to clients. any help would be greatly appreciated. thx.
Or copy this URL:
https://www.metalroofing.com/spirit/comment/10848/find/
Austen,
I am sorry. This is outside my expertise. Have your talked with Berridge and Knudson. Surely they would have some answers or be able to refer you to someone?
1/24/2008
Or copy this URL: https://www.metalroofing.com/spirit/comment/10848/find/Isaiah Industries, Inc.
2/6/2008
Or copy this URL: https://www.metalroofing.com/spirit/comment/10849/find/2/12/2008
Or copy this URL: https://www.metalroofing.com/spirit/comment/10850/find/Isaiah Industries, Inc.
2/12/2008
Or copy this URL: https://www.metalroofing.com/spirit/comment/10851/find/