INVERTED CURVE ROOF: "Hi, The front of our 80-year-old house has a front ..." - Bill Williams (2/6/2007) | Roofing Styles | Archive

This topic has been closed by the administrator. Comments are no longer accepted.

Hi, The front of our 80-year-old house has a front roof that begins above the front of the full-length porch and ascends in an upward swooping curve until aligning with the 12-12 pitch of the higher half of the roof. Our question is: Will your vertical panels flex to a curve? (The curve being in the direction as if the panel were face-up, with the short ends up and the center down), -like the rocker on a rocking chair? We hope to hear from you. If not, are their choces besides shingling? Thanks much, Bruce		Bill Williams 2/6/2007	Share Or copy this URL: https://www.metalroofing.com/spirit/comment/9209/find/
Several of our member manufacturers can produce curved panels. Try ATAS, Englert, Peterson, Fabral, and MBCI.		Todd Miller Isaiah Industries, Inc. 2/6/2007	Share Or copy this URL: https://www.metalroofing.com/spirit/comment/9210/find/