This topic has been closed by the administrator. Comments are no longer accepted.
I have been trying to locae a mnfr. of 5vr panels in aluminum for costal instalations with florida and or Miami/Dade approval, and have not found any 5v panels in aluminum. Is their an up lift problem with the 5 vr in aluminum ??
Or copy this URL:
https://www.metalroofing.com/spirit/comment/8254/find/
I checked out both of the Web sites you listed and they only make mention to Galvanized Steel, nothing in aluminum. Also the atas company doesn't have a true 5v crimp panel avaiable. Any other ideas on the aluminum 5vr, or a link to a site that has the techincal data and Fl approvals??
Or copy this URL:
https://www.metalroofing.com/spirit/comment/8255/find/
I really am certain that Fabral does offer 5V in aluminum. You may need to contact them direct to get the info you need though.
If they are not offering it, then they have discontinued it very recently.
You could also contact McElroy Metals.
All that said, through-fastened corrugated roofing can be problematic in aluminum due to aluminum expansion and contraction and the resulting fatigue on fasteners.
That is why most aluminum roofing products have concealed clip fasteners.
6/24/2006
Or copy this URL: https://www.metalroofing.com/spirit/comment/8253/find/Isaiah Industries, Inc.
6/25/2006
Or copy this URL: https://www.metalroofing.com/spirit/comment/8254/find/6/25/2006
Or copy this URL: https://www.metalroofing.com/spirit/comment/8255/find/Isaiah Industries, Inc.
6/25/2006
Or copy this URL: https://www.metalroofing.com/spirit/comment/8256/find/