This topic has been closed by the administrator. Comments are no longer accepted.
My soon and I are in the process of building
a 40 x 60 metal building 16 ft high. We
started on the roof last weekend and after
installing about half of the roof we noticed
our ridgecaps were leading off. We are about
4 inches off center, we have been measuring
from our roof panels to the end of the building to try and keep the roof panels
straight. Can you tell us what went wrong
and how to correct it and keep it straight ?
Roof panels have about a 2 foot gap in the
middle that you cover with ridgecap.
Thanks
Gary
Or copy this URL:
https://www.metalroofing.com/spirit/comment/7006/find/
I am not sure exactly what type of panel you're installing. Are you certain that the building is square? Do you have photos that you can email to me at [email protected]
11/1/2005
Or copy this URL: https://www.metalroofing.com/spirit/comment/7006/find/Isaiah Industries, Inc.
11/1/2005
Or copy this URL: https://www.metalroofing.com/spirit/comment/7007/find/