Gable end finish to a ...: "I have a contractor installing a USS standing seam, clipped ..." - Guest User (12/5/2004) | Standing Seam roof | Archive

This topic has been closed by the administrator. Comments are no longer accepted.

I have a contractor installing a USS standing seam, clipped in roof. As work has proceeded,I notice that at the gable end the last panel was cut and butted against a standing inverted "L" that was installed as part of the cover for the edge of the roof. I asked the contractor if this was correct, because it appears water can get under both the panel and the edge cover. Also the under side of the standing "L" is a yellowish primer color that shows up readily against the blue color of the roof. Please advise.		Guest User 12/5/2004	Share Or copy this URL: https://www.metalroofing.com/spirit/comment/4778/find/
Clif, A picture is worth a thousand words ... any chance you can send me a digital photo of what was done? My email is [email protected]		Guest User 12/5/2004	Share Or copy this URL: https://www.metalroofing.com/spirit/comment/4779/find/

Gable end finish to a standing seam roof