1/2: "" - Guest User (9/9/2004) | Roof Pitch | Archive

This topic has been closed by the administrator. Comments are no longer accepted.

	Guest User 9/9/2004	Share Or copy this URL: https://www.metalroofing.com/spirit/comment/3956/find/
	Guest User 9/9/2004	Share Or copy this URL: https://www.metalroofing.com/spirit/comment/3957/find/
Please advise me on materal to be used and installation instruction or guidelines. What I have is a 1/2"/12" or less slope on my two porches and it looks like a alluminum painted product single overlap non-locking with edges that overlap 1" to 1 1/2".Is this to code and what and how hould have been used, so I can it get it fixed correctly.	Guest User 9/9/2004	Share Or copy this URL: https://www.metalroofing.com/spirit/comment/3958/find/
Connie I do not have any information to provide to you but you are asking a simlar question to mine so hopefully we can both get some useful information. I have an old Minnesota north woods cabin that has shed roof additions on the front and back at about 1 1/2"/12 pitch. We have always used roll roofing but it's life is about 12-15 years. Can metal roofing go this flat?	Guest User 9/9/2004	Share Or copy this URL: https://www.metalroofing.com/spirit/comment/3959/find/
This is not so much a matter of "code" as it is whether this type of installation is in keeping with the manufacturers' instructions for this roofing. Send me some pictures at [email protected] and I can give you some ideas possibly.	Guest User 9/9/2004	Share Or copy this URL: https://www.metalroofing.com/spirit/comment/3960/find/
Yes, there are "field-seamed" metal roofs which work well on this pitch. Contact an experienced metal roofing contractors and let them know that you need a mechanically seamed standing seam roof -- double or triple lock.	Guest User 9/9/2004	Share Or copy this URL: https://www.metalroofing.com/spirit/comment/3961/find/