This topic has been closed by the administrator. Comments are no longer accepted.
I have a 12/54 1974 mobile home with new vinyl window vinyl siding a pitched roof. The pitch roof was put over top of the old roof which was a tin roof .Recently I discovered I have soft spots in the ceiling along the exterior walls i pulled down one of the ceiling panels and cut open the vapour barrior and took out the insulation and notice that there was condensation on the tin how can I fix this problem
any advise appreciated
Or copy this URL:
https://www.metalroofing.com/spirit/comment/13008/find/
How does one provide for that ventilation? I am experiencing the same issue. I have a mobile home with a tin roof (non-pitch - built in 1982). The pitch roof was built over the top of the existing roof - my ceilings were leaking, so I took down the ceiling and the insulation. The inside tin beaded up significantly with large droplets of moisture - the top of the 'old'roof was completely dry! This occurred during the Winter months in Central New York. Thank-you for any assistance you can provide.
3/25/2009
Isaiah Industries, Inc.
3/28/2009
6/2/2009
Isaiah Industries, Inc.
6/4/2009
The Best in Polymer Roofing Soutions
8/25/2009