This topic has been closed by the administrator. Comments are no longer accepted.
I have a design for a roof that has a 0.5/12 pitch and 32 ft long in teh pitched direction. Are there metal roofing products that can be used on this roof?
Or copy this URL:
https://www.metalroofing.com/spirit/comment/240/find/
There are some metal roofs that are appropriate for very low pitch roofs. These would all be vertical panel roofs rather than shingle-style metal roofs. Additionally, in most cases, seaming the panels would require an on-site seamer after they're installed and/or, with some panels, there might be a water resistant adhesive in the seams.
To do further research, I suggest going to the below page of the MRA website and contacting the companies that are listed as manufacturing "vertical panels".http://www.metalroofing.com/members.cfm?action=about
6/21/2001
Or copy this URL: https://www.metalroofing.com/spirit/comment/240/find/Isaiah Industries, Inc.
6/21/2001
Or copy this URL: https://www.metalroofing.com/spirit/comment/241/find/