This topic has been closed by the administrator. Comments are no longer accepted.
Is 28 gauge normal for a steel panel roof?
Which finish lasts longer, painted or silver
galvalume?
The interior of my house has a cathedral, tongue and groove ceiling. What precautions, consideration or advice do you have regarding a steel panel roof over this? Are there any special considerations when installing a "cricket" or "saddle" between a steel roof and a wood paneled chimney? Are aluminum gutters OK with a steel roof and should gutter revision/repair happen before or after a new steel roof is installed?
Or copy this URL:
https://www.metalroofing.com/spirit/comment/5456/find/
28 gauge is not unusual though there are thicker metal roofs as well.
I would inquire whether the product meets the base metal and coating requirements of the Metal Construction Association certified roofing program.
Generally, a painted product will last longer and have less maintenance than an unpainted one.
Steel roofing going into aluminum gutters will likely not cause a problem.
It sounds like you have no ventilation in your roof assembly. Building Codes call for a minimum 1" airspace beneath the roof deck. I would suggest working with a well experienced metal roofing contractor and seeing if some ventilation can't be accomplished with your new roof. There are several ways in which it could be done.
I would suggest removing the old gutters, installing the roof, and installing the new gutters.
Or copy this URL:
https://www.metalroofing.com/spirit/comment/5458/find/
They can generally be ordered to exact lengths although there is a minimum and a maximun handling length. This leaves us to what you mean by "metal tin". Th majority of metal roofing today is made from Steel and Aluminum. The steel has a rust resistant metalic coating on it such as Zinc known as galvanized or a combination of zinc and aluminum known as Galvalume. For exposed roofing you want to use Galvalume with a coating weight of AZ 55.
2/24/2005
Isaiah Industries, Inc.
2/26/2005
3/13/2005
Dura-Loc Roofing Systems, Inc.
3/14/2005