This topic has been closed by the administrator. Comments are no longer accepted.
Im a project manager for a Large residental Contractor in Northern Wisconsin. Before I get to detailed can one of you send me in the right direction for the proper installation, and material to be used for a standing seam metal roof ridge vent. I have a project that we are haveing alot of proplems with water leaking, and I feel that it is the metal roofers ridge vent that he has installed, which is causing a ventilation problem causing condisation on on the roof sheating.
Thank You
Crystal
Or copy this URL:
https://www.metalroofing.com/spirit/comment/5106/find/
Crystal,
The manufacturer of the roofing really should have details for how to vent the ridge of their installations.
Instructions will vary from product to product.
Or copy this URL:
https://www.metalroofing.com/spirit/comment/5107/find/
Todd
This sub contrctor has a machine the bends the roofing on site. I dont know what the manufactur is, I really need any help that I can get, the home owner is very upset, and I dont feel the roof is venting thru the ridge, based on nolage of how a ridge vent should work.
Or copy this URL:
https://www.metalroofing.com/spirit/comment/5108/find/
There are many methods of ridge vent but one is to use a vented closure strip (see www.profilevent.com) and then put a metal cap over it.
If you like, email pictures of the job and ridge and I will try to help further.
Todd
[email protected]
1/11/2005
Or copy this URL: https://www.metalroofing.com/spirit/comment/5106/find/1/11/2005
Or copy this URL: https://www.metalroofing.com/spirit/comment/5107/find/1/13/2005
Or copy this URL: https://www.metalroofing.com/spirit/comment/5108/find/1/14/2005
Or copy this URL: https://www.metalroofing.com/spirit/comment/5109/find/