Below is a forum for exchanging information concerning residential metal roofing, including general material and metal roofing installation questions. Should you have questions or concerns that deal with specific branded metal roof products please contact the manufacturer directly.
Tom has been in the metal roofing industry for the past twenty years, serving in product and business development, marketing, as an industry consultant, and in his previous position as Executive Director of the MRA. Tom writes, "I'm not an 'expert' installer -- but I know enough to be dangerous! I've installed small metal roofing projects and organized installation training seminars. And I know when I need more expert help to answer your questions. So when you get an answer from me, you know there's expertise behind it."X
Todd has served as President of Classic Products, Inc., one of the country's leading metal roofing manufacturers, since 1996. Before that, he served for 15 years in various marketing-related roles at the company. Under Todd's leadership, Classic Products has taken an active role in educating homeowners across North America about the many advantages of metal roofing. Todd participates in various metal roofing industry associations, and is a Board Member of the Metal Roofing Alliance (MRA) and Metal Construction Association (MCA).X
Mr. Bus has over twenty years experience in the metal roofing and siding industry. Dick is President of ATAS International, Inc., a family owned manufacturer of architectural and residential metal roofing and siding. ATAS manufactures profiles in aluminum and steel for the residential and architectural roofing market. Panels are manufactured with high performance coatings. Dick was Chairman of the Residential Roofing Council for the Metal Construction Association (MCA). He Chaired the committee to write the Minimum Performance Guideline for Residential Metal Roofing. He is now the 2nd Vice President of the MCA, which is part of the Board of Directors and he is also, President of the Metal Roofing Alliance (MRA), a consumer awareness campaign.X
Ken Buchinger is Vice President of Corporate Warranties and Certifications for Houston based NCI Building Systems. He has been with the company for 18 years. He is responsible for product testing, improvements, and development. In addition, he is in charge of the company's Erector Certification Program, which trains erectors in the proper installation techniques of the company's metal roofing systems. And, he also is in charge of inspection and review of projects for weathertightness warranties. Ken has written numerous articles for various trade magazines and gives presentations for various organizations. Prior to joining the company in 1988, Ken erected metal buildings, architectural roofing systems and structural steel for 13 years.X
David Stermer is the Director of Engineering for Metal Sales Manufacturing Corporation based in Louisville, Kentucky. He has been in his current position since 2005. David is responsible for product testing, product approval, product development, documentation and project design. Prior to joining Metal Sales, David worked for a major metal building manufacturer for 15 years in various roles, including Design Engineer and Engineering Manager. David is a Professional Engineer, has a Master of Sciences degree in Structural Engineering and is currently serving on the ASCE 7-16 Wind Load Subcommittee.X
Eric Novotny has served as the president of Windows on Washington, and award winning remodeler, since 2005. Prior to that, Eric served as an environmental consultant for large land and property development firms. Eric's extensive background in Environmental Engineering and Building Science are the foundation from which he draws to advise home and building owners on intelligent building material selections. Metal roofing is the perfect example of a building material that is both environmentally friendly and more energy efficient than its commonplace equivalents. Eric continues to consult and educate consumers on the benefits of metal roofing and how these systems can be used in both traditional and high efficiency construction while delivering vastly improved aesthetic appeal.X
Brian is a 20-year veteran of the metal construction industry and has been with Drexel Metals from its early days. Brian is an elected member of the Board of Directors of the Metal Construction Association. He chairs the Statistics Committee, co-chairs the Codes and Standards Committee and sits on multiple task groups. Brian is also a member of the Cool Metal Roof Coalition, sits on the Industry Advisory Board for the NRCA (National Roofing Contractors Association) as well as the CEO Advisory Council for the Central Bucks Chamber of Commerce. Brian has published and contributed to numerous technical trade-articles/white papers relating to metal building products, and presents nationally, internationally and regionally about sustainable design and the use of metal to reduce heat gain for industrial, commercial and residential structures. Brian invented the Drexmet® Paint Pen in 2001, an air dry Kynar touch up system, which today is the preferred touch up method of the industry.X
If you have a metal roofing question, please post it below and a member of our panel of contributors will provide a response. Answers provided by contributors are based on the limited information posted and, therefore, may not provide a complete or accurate answer under all of the relevant facts and circumstances. No advice or information obtained through the forum or this website shall create any warranty by MRA or its contributors whatsoever and all warranties are disclaimed. MRA and its contributors disclaim any liability of any kind arising out of or relating to use of the answers or information provided hereunder, and by using the forum, you agree to waive any claims against MRA and its contributors and hold them harmless from any liability or damages of any kind arising out of or relating to the forum. For a detailed description of the terms and conditions of use of the Forum and this website, including a more detailed description of disclaimers of warranties and limitations of liability, please see the Terms and Conditions section of this website. MRA does not endorse or recommend any commercial products, processes, or services. The views and opinions of contributors to this Forum do not necessarily state or reflect those of MRA or its members, and they may not be used for advertising or product endorsement purposes.
Click on a category below to post and read messages.
|Energy Efficiency||25||108||2/09/15 10:08AM|
|I Have An Existing Metal Roof and Have A Question||328||1331||3/28/15 11:59AM|
|Is A Metal Roof Right For My House||82||325||3/28/15 10:33AM|
|Metal Roofing Benefits||21||77||11/26/14 3:32PM|
|Product Selection||94||382||3/17/15 11:01AM|
Not yet a member? Sign up here
As the #1 educational resource for the residential metal roofing industry, the Metal Roofing Alliance helps match metal roofing contractors with interested home owners in your area. We help consumers decide if a metal roof is right for their home, and when they're ready, provide them with a list of contractors near their home.
After learning about all that metal roofing has to offer through MetalRoofing.com, many homeowners are interested in installing a metal roof themselves. We make this home improvement project possible by directly connecting these homeowners to you, their local distributor.
The goal of the MRA is to promote residential metal roofing by educating consumers on the many benefits of metal roofing. As a member manufacturer, you'll help promote the use of residential metal roofing to interested consumers, and gain access to consumer leads. For more information, contact Bill Hippard, Executive Director, at firstname.lastname@example.org.Member LOGIN